Solution Description
Solution Description
WTZ A100N Overload limiter can be in the type of Chinese characters, graphics, characters and so on extensive exhibit the a variety of parameters in the procedure of operate.
As the main hook load, vice hook load, perform growth Angle, length of increase, radius, and so forth.
○Overload Limiter Alarm function
Have audio and light-weight alarm function: when the crane boom operate amplitude restrict close to operate, when lifting load and torque gadget near to the permitted load limit, torque program issued a warning of gradual beeping sound. Warning lights flashing little by little torque system.
When jib frame work scope to operate restrict, when the lifting load and torque reaches equipment when the permitted load limit minute deliver urgent alarm beeping seem. Shortness of torque program alarm indicating purple gentle flashing.
○ Overload Limiter safety function
Handle output perform: when increase amplitude restrict near to work, operate when lifting load and torque gadget shut to the permitted load restrict, the method output torque manage sign to stop the crane continue to carry on to run in the path of chance, permit crane moves in the route of safety.
Load Second Indicator(safe load indicator or Crane personal computer) is a system which is installed on various sorts of cranes like mobile, crawler, tower, gantry, portal, maritime and offshore crane. It notify the operator if the elevate is exceeding the secure operating variety. In some cases, the unit will bodily lock out the machinery in situation it decides to be unsafe.
It controls the lifting gear to operate as per the manufacturer’s suggested secure load charts. Each and every of the measured parameters like load weight, operating radius, manage limit,angle and extension of the crane growth, and so forth will then even more be shown in the operator’s cabin.
WTZ-A100N Overload Limiter ( LMI ) System
Complex Parameters
Data LOGGER
Information USB downloadable: built-in USB interface, can assist running info obtain, can overview the historic information from any time period of time. Via the examination of the record, the full position of web site operation can be restored. Ultra-large Potential: the system can support genuine load information fifty,000 round logging, increased ability than the common 16000 report.
Info Record Picture
Installation Situations
Certifications
Business Info
Weite Technologies Co.,Ltd
Founded in 2002, it is national hi-tech business positioned in HangZhou, China. It has been concentrating on R&D and OEM manufacturing of lifting safety security products this kind of as Load Instant Indicator, Protected monitoring systems, overload limiter, Load cell, Anemometers etc.We continuously focus on making sure lifting equipments run securely as lengthy-time period pursuing aim.
“The dependable Basic safety Associate for Global Leading one hundred Crane Proudly owning Businesses like Tat Hong, Asiagroup, Huge Crane and Fortune 500 corps” . These days, WTAU items are commonly utilised in marine business,electrical, chemical, metal, metallurgy, development, ports and other industries, and have been wide spreaded to more than thirty international locations and areas.
International Companions
FAQ
one) Is your business properly-reputated? How to demonstrate that?
It is a China Top 3 brand name concentrating on Crane Security Safety Tools. We are also Security Associates for Global Best 100 Crane Owning Firms like Tat Hong(prime 9), Asiagroup(prime forty five), Large Crane(leading 94) and Top 500 organizations such as ABB, Macgragor,TTS,CNOOC,etc. Items are been offered to above 30 countries and regions globally.
two) How to assure the top quality?
The Item Warranty for the complete merchandise is 12 months. Any problem right after installation, we will modify the new 1 for free.
3) How to install the LMI?
English Person Manual(consist of all the particulars of every single product) will be provided for installation and trouble shooting(refer to the pic underneath). Also free Remote Immediate Complex assistance would be offered by our english engineers. Or we can deliver our engineers to support you domestically.
four) How significantly is your LMI program?
Send out me the crane model, hook amount, functioning conditions(Luffing Tower Working Condition, Pilling) and specific necessity and the like. Your contact details is a have to.
five) How can I location order?
A: You can get in touch with us by electronic mail about your get information, or place purchase on line.
6) How can I pay out you?
A: After you verify our PI, we will request you to pay out. T/T and Paypal, Western Union are the most typical ways we are utilizing.
Relevant Merchandise
|
US $1,990 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Gantry Crane & Portal Crane |
###
| Customization: |
Available
|
|---|
|
US $1,990 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Gantry Crane & Portal Crane |
###
| Customization: |
Available
|
|---|
CZPT(R) Tolerance Ring For Limiter Torque
Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.
CZPT(r) Tolerance Ring
CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.
CZPT TL
TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.
IWIS FT series
FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.
TL-IT inline
TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
editor by czh 2022-12-14