Product Description
Solution Description
WTZ A100N Overload limiter can be in the type of Chinese figures, graphics, characters and so on thorough show the a variety of parameters in the procedure of operate.
As the major hook load, vice hook load, function growth Angle, size of increase, radius, and so forth.
○Overload Limiter Alarm function
Have audio and gentle alarm purpose: when the crane increase operate amplitude limit shut to function, when lifting load and torque device near to the permitted load limit, torque system issued a warning of sluggish beeping audio. Warning lights flashing gradually torque program.
When jib frame function scope to work limit, when the lifting load and torque reaches gear when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light-weight flashing.
○ Overload Limiter protection function
Control output function: when boom amplitude restrict near to function, operate when lifting load and torque gadget shut to the permitted load restrict, the system output torque manage sign to cease the crane carry on to continue to run in the direction of threat, permit crane moves in the direction of security.
Load Second Indicator(risk-free load indicator or Crane personal computer) is a system which is set up on numerous types of cranes like cellular, crawler, tower, gantry, portal, marine and offshore crane. It inform the operator if the carry is exceeding the safe working variety. In some circumstances, the system will physically lock out the machinery in situations it determines to be unsafe.
It controls the lifting products to operate as for each the manufacturer’s proposed risk-free load charts. Each and every of the calculated parameters like load fat, functioning radius, management limit,angle and extension of the crane boom, and so forth will then additional be exhibited in the operator’s cabin.
WTZ-A100N Overload Limiter ( LMI ) System
Technological Parameters
Information LOGGER
Data USB downloadable: developed-in USB interface, can assist operating knowledge download, can overview the historic info from any time time period. Through the investigation of the report, the total status of internet site procedure can be restored. Ultra-massive Ability: the system can assistance real load data 50,000 round logging, greater potential than the common 16000 report.
Data Document Graphic
Set up Circumstances
Certifications
Firm Data
Weite Technologies Co.,Ltd
Established in 2002, it is national hello-tech enterprise situated in HangZhou, China. It has been concentrating on R&D and OEM production of lifting safety protection units such as Load Moment Indicator, Safe monitoring systems, overload limiter, Load cell, Anemometers and so on.We continuously focus on making certain lifting equipments operate securely as lengthy-expression pursuing purpose.
“The trusted Basic safety Companion for Worldwide Prime a hundred Crane Owning Companies like Tat Hong, Asiagroup, Large Crane and Fortune 500 corps” . These days, WTAU goods are commonly utilised in maritime industry,electrical, chemical, steel, metallurgy, building, ports and other industries, and have been wide spreaded to above 30 nations and regions.
International Companions
FAQ
1) Is your company effectively-reputated? How to show that?
It is a China Leading 3 model focusing on Crane Basic safety Defense Tools. We are also Protection Companions for Global Top 100 Crane Owning Companies like Tat Hong(top 9), Asiagroup(prime 45), Large Crane(best ninety four) and Best 500 companies this kind of as ABB, Macgragor,TTS,CNOOC,and many others. Goods are been sold to above thirty nations around the world and locations globally.
two) How to assure the top quality?
The Solution Warranty for the total product is 12 months. Any problem following set up, we will alter the new 1 for cost-free.
three) How to install the LMI?
English Consumer Guide(incorporate all the details of every single item) will be offered for installation and difficulties capturing(refer to the pic beneath). Also free of charge Distant Immediate Technological help would be supplied by our english engineers. Or we can deliver our engineers to assist you locally.
4) How considerably is your LMI system?
Send me the crane design, hook amount, working problems(Luffing Tower Doing work Situation, Pilling) and specific need and the like. Your get in touch with information is a need to.
5) How can I spot purchase?
A: You can make contact with us by e mail about your order information, or spot purchase on line.
6) How can I shell out you?
A: Soon after you confirm our PI, we will ask for you to shell out. T/T and Paypal, Western Union are the most normal approaches we are utilizing.
Connected Items
|
US $1,990 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Gantry Crane & Portal Crane |
###
| Customization: |
Available
|
|---|
|
US $1,990 / Piece | |
1 Piece (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| After-sales Service: | Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Type: | Gantry Crane & Portal Crane |
###
| Customization: |
Available
|
|---|
CZPT(R) Tolerance Ring For Limiter Torque
Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.
CZPT(r) Tolerance Ring
CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.
CZPT TL
TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.
IWIS FT series
FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.
TL-IT inline
TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
editor by czh 2022-12-23